SLT 150S-Servo is a servo motor based CNC Trainer machine. We have successfully implemented Servo technology in our Trainer machines. Now it is possible to provide hands on experience to students to most of the machine tool industry norms. Rapid travel of 10,000 mm/min and Fanuc / Siemens emulated keyboard imparts necessary industrial grade machine experience to students.

Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.

Also, PLC allows HYTECH machines to be operated remotely. Hence problem detection and eventual solution can be attained within minutes.

  • SLT 150 Servo
  • SLT150 with slant bed and Hydraulic Tailstock
  • SLT 150 Servo

Key features of this PLC based machine are as follows

  • Rapid of 10,000 mm/min
  • Position Accuracy: 1 micron / 0.001 mm
  • Repeatability: 10 micron / 0.010 mm
  • Feed Rate: 0 – 10,000 mm/min (Continuous Variable)
  • Fanuc / Siemens emulated keyboards
  • Provision of C Axis
  • Automatically Opening Doors
  • Servo Motor Make: Mitsubishi / Siemens (Imported from Japan / Germany)
  • 45 Degrees Slant Besd option available
  • Single Block Function
  • Dry Run Function
  • FMS Compatibility
  • Automatic Coolant
  • Automatic Lubrication
  • Hydraulic Power Chuck
  • Hydraulic Tailstock
  • High Speed Spindle

Industrial PLC

Siemens Servo Motor and Drive

This machine works on a Windows based software from CutViewer – United Kingdom. This software, which is used in more than 32 countries all over the world for industrial applications provides the necessary industrial exposure to students.


Separate Control Panel with PLC

  • Separate Control Panel
  • Industrial PLC
  • Servo Motors and Servo Drives from Mitsubishi / Siemens
  • Fanuc Emulated Keyboard
  • Easy Maintenance
  • Ample space provided for natural cooling. No Air Conditioning required
  • Easy Access
  • Zinc plated panel to give better EMF shielding and to reduce noise.

Separate controller behind machine providing easy access for maintenance



Hydraulic Chuck

  1. Indigenously developed Hydraulic Chuck
  2.  Spindle speed up to 4,000 RPM
  3. Air Mist Lubrication
  4. Available Chuck Sizes: 110mm / 125mm / 150mm

Hydraulic Chuck with 200mm Diameter



Control Panel integrated with machine

  1. Industrial design
  2. Fanuc / Siemens Emulated Keyboard
  3. Operator Friendly Design
  4. Easy Maintenance
  • Provision for C Axis Arrangement
  1. Provision for C Axis
  2. Resolution of 0.01 Degrees

Separate Console with Industrial MOP



Key features of CutViewer Mill software are as follows

  • Cross Section Display
  • Built in Editor (for those last minute fixes)
  • Trace forward / backward
  • Dynamic rotation of viewpoint
  • Linear and Angular Measurement
  • STL Compare' function
  • Volumetric Measurement
  • Machining Time Calculation
  • Rapid Collision Detection
  • Canned Cycles
  • Dynamic Zoom / Pan / Rotation
  • Turbomode - Results in few seconds
  • Block cycle Time can be precisely measured

CutViewer Simulation Software




Machine Specifications

SLT 150 Servo
Machine Details:
Bed Type Flat / 45 Degrees Slant
Keyboard Type Fanuc Emulated / Manual
Chuck Size 150 mm (Dia)
Chuck Type Hydraulic
Maximum Turning Diameter 100 mm
Maximum Turning Length 250 mm
Center Height 150 mm
Swing over Cross Slide 125 mm
Swing Over Bed 300 mm
Distance between Centre 320 mm
CNC Controller Details
Controller Hytech with CutViewer-United Kingdom
Control System PLC Based Control System
Operating Software CutViewer - United Kingdom
Accuracy
Positioning 0.005 mm
Repeatability +/- 0.005 mm
Resolution 0.001 mm
Spindle
Spindle Motor AC Servo
Spindle Motor Capacity 3.7 KW / 5 HP
Spindle RPM 100 to 4000 RPM with VFD
Spindle Nose Taper A 2-5
Hole Through Spindle 20 mm
C Axis (Optional) C Axis with Brake
Axes
Axis Motor and Drive Servo Motor with Servo Drives (Mitsubishi / Siemens)
X Axis Travel 100 mm
Z Axis Travel 300 mm
Ball Screw X / Z Ø25 x 5 - C3 Class
Programmable Feed Rate 0 to 10,000 mm/min
Rapid Travel 10,000 mm/min
Turret and Tooling
Turret Type Automatic
Number of Stations 4 / 8
Tool Cross Section 12 mm x 12 mm
Boring Bar Size 16 mm
Tailstock
Tailstock Base Stroke 170 mm
Tailstock Quill Stroke 30 mm
Tailstock Actuation Hydraulic/ Manual
Miscellaneous
Lubrication Automatic
Coolant Automatic
FMS Compatibility Provided
Dimension in mm 1520 x 800 x 1200 mm
Power Supply 415V, +-2% 50 Cycles, 3 Phase
Download Download catalog of SLT 150 Servo.