NMT 225 is exactly similar to NMT 225S-Servo model barring the axis motors. NMT 225 is based on stepper motors and stepper drives. This is our highest selling model (Among CNC Milling Trainer Machines) in Indian subcontinent. Rigid design and PLC based technology gives this machine a technological advantage over its competitors.

Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.

Also, PLC allows HYTECH machines to be operated remotely. Hence problem detection and eventual solution can be attained within minutes.

  • NMT 225
  • Console_Trim
    Pneumatic Vice

Key features of this PLC based machine are as follows

    • Rapid of 1,200 mm/min
    • Position Accuracy: 5 micron / 0.005 mm
    • Repeatability: 10 micron / 0.010 mm
    • Feed Rate: 0 – 1,200 mm/min (Continuous Variable)
    • Based on FATEK PLC
    • Fanuc / Siemens emulated keyboards
    • Provision of 4th Axis
    • Automatically Opening Doors
    • Single Block Function
    • Dry Run Function
    • FMS Compatibility
    • Automatic Coolant
    • Automatic Lubrication
    • Hydraulic Power Chuck
    • Hydraulic Tailstock
    • High Speed Spindle

     

Industrial PLC

Imported Stepper Motor Drives

Pneumatic Vice

Separate Control Panel with PLC

    • Separate Control Panel with isolation
    • Industrial PLC
    • Servo Motors and Servo Drives from Mitsubishi / Siemens
    • Easy Maintenance
    • Ample space provided for natural cooling. No Air Conditioning required
    • Easy Access
    • Zinc plated panel to give better EMF shielding and to reduce noise.

Separate controller behind machine providing easy access for maintenance

Control Panel integrated with machine

    1. Industrial design
    2. Fanuc / Siemens Emulated Keyboard
    3. Operator Friendly Design
    4. Easy Maintenance


This machine works on a Windows based software from CutViewer – United Kingdom. This software, which is used in more than 32 countries all over the world for industrial operations provides the necessary industrial exposure to students


Key features of CutViewer Mill software are as follows

    • Cross Section Display
    • Built in Editor (for those last minute fixes)
    • Trace forward / backward
    • Dynamic rotation of viewpoint
    • Linear and Angular Measurement
    • STL Compare' function
    • Volumetric Measurement
    • Machining Time Calculation
    • Rapid Collision Detection
    • Canned Cycles
    • Dynamic Zoom / Pan / Rotation
    • Turbomode - Results in few seconds
    • Block cycle Time can be precisely measured

CutViewer Mill

Machine Specifications

SMT 250
Axes
Axis Motor and Drive Servo Motor with Servo Drives
X Axis Travel 300 mm
Y Axis Travel 225 mm
Z Axis Travel 250 mm
4th Axis Provision (Optional) Provided
Distance between Table top and Spindle Nose 70 - 370 mm
Spindle to column distance 270 mm
Feed Rate 0 to 10,000 mm/min
Rapid Travel 10,000 mm/min
Table
Table Size 560 x 220 mm
T Slot 3 x 10 x 50
Load on Table 120 Kg
Spindle
Spindle Motor Capacity 2 HP
Spindle Nose Taper ISO 30 / BT 30
Spindle RPM 100 to 3000 RPM
CNC Controller Details
Controller CutViewer-United Kingdom
Control System PLC Based Control System
Operating Software CutViewer - United Kingdom
Accuracy
Positioning 0.010 mm
Repeatability +- 0.005 mm
Resolution 0.001 mm
4th Axis Resolution (Optional) 0.02 Degrees
Tool Changer (ATC)
Tool Changer Automatic
No. of Tools 8
Maximum Tool Length 40 mm
Maximum Tool Dia. 16 mm
Type of ATC Umbrella Type
Actuation Hydraulic (Compressor not required)
Machine Details:
Run Speed Control Computer Controlled with Software
Interpolation Linear / Circular / Parabolic
Real Time tool path simulation Provided
Vice Type Pneumatic/ Manual
Dimension in mm 1300 x 1100 x 1900 mm
Download Download catalog of .