HPL 100 is a Semi Production CNC Lathe with industrial controllers such as SIEMENS / FANUC / MITSUBISHI.

This CNC Lathe is perfectly suitable to be used for light production purpose.

This is the ideal product for educational institutes which are looking to impart industrial training to their students as well as doing some light production activity on the same machine.

HPL series Turning machines are equipped with production turrets. LM Guides and metallic bellows covering the guideways are also provided.

One of the most important features of this machine is that it is manufactured specifically for educational institutes. It offers hands on experience of industrial turning centers with safety features of educational trainer machines.

  • Prod Lathe Front
  • Prod Lathe Back
  • Hyd Tailstock with Spindle Separation
  • Lathe_Hydraulic Chuck_Back
  • Hydraulic Chuck with manual tailstock

Available Controllers:


Key features of this PLC based machine are as follows

High Speed Spindle

  • Spindle Speed up to 10,000 RPM
  • Spindle Taper: A 2-3 / A 2-5
  • Encoder Feed Back
  • Air Mist Lubrication
  • Angular contact Bearings

Hydraulic Chuck

  • Indigenously developed Hydraulic Chuck
  • Automatic chuck operation through
  • program & foot switch
  • Available Chuck Sizes:110mm / 125mm / 150mm / 200mm

Indigenously developed Hydraulic TailStock

  • Stroke Up to 250 mm
  • Foot Switch for Operation
  • Bi Direction Production Turret
  • Servo Turret
  • 8 Station Station Automatic Turret

LM Guideways& Metallic Bellows

  • LM Guideways
  • Metallic Bellows covering the guide ways
  • Imported hardened Ball Screws
  • Chip Conveyor
  • Spindle separation separating dry and wet

HPL 150 with Hydraulic Chuck

Key features

  • Production Turret – Servo Type
  • Spindle separation separating Dry and Wet areas
  • Air Conditioned control Panels
  • LM Guideways
  • Rapid Rate from 5,000 mm/min to 20,000 mm/min
  • Metallic bellows covering guide ways
  • Imported hardened Ball Screws
  • 45 degrees Slant Bed option available
  • Industrial MPG for ease of operation
  • Industrial Controller Siemens / Fanuc
  • Encoder Feedback for Spindle
  • Hydraulic Tailstock
  • Hydraulic chuck
  • Spindle speed up to 10,000 RPM
  • Air Mist Lubrication for high speed spindle
  • Manual Programming Guide (MPG) Pendant
  • Complete training and maintenance manual

Machine Specifications

HPL 100
Machine Details:
Ball Screw X / Z Flat / 45 Degrees Slant
Chuck Size 125 mm (Dia)
Chuck Type Hydraulic/ Manual
Maximum Turning Diameter 80 mm
Maximum Turning Length 250 mm
Center Height 100mm
Swing over Cross Slide 100 mm
Swing Over Bed 200 mm
Distance between Centre 320 mm
CNC Controller Details
Controller Siemens / Fanuc
Positioning 0.010 mm
Repeatability +- 0.005 mm
Resolution 0.001 mm
Spindle Motor AC Servo
Spindle Motor Capacity 3.7 KW / 5 HP
Spindle RPM 100 to 4000 RPM with VFD
Spindle Speed Continuos Variable
Spindle Nose Taper A 2-3 / A 2-5
Hole Through Spindle 20 mm
C Axis (Optional) C Axis with Brake
Axis Motor and Drive Servo Motor with Servo Drives
X Axis Travel 100 mm
Z Axis Travel 300 mm
Feed Rate 0 to 10,000 mm/min
Rapid Travel 10,000 mm/min / 20,000 mm/min
Turret and Tooling
Turret Type Automatic - Servo Type
Number of Stations 4 / 8
Tool Cross Section 16 mm x 16 mm
Boring Bar Size 16 mm
Tailstock Base Stroke 200 mm
Tailstock Quill Stroke 1000 mm
Tailstock Actuation Hydraulic/ Manual
Lubrication Automatic
Coolant Automatic
FMS Compatibility Provided
Dimension in mm 1500 x 1200 x 1700 mm
Power Supply 415V, +-2% 50 Cycles, 3 Phase
Download Download catalog of HPL 100.