CLT 100 is exactly similar to CLT100S-Servo model barring the axis motors. CLT 100 is based on stepper motors and stepper drives. This is our highest selling model in Indian subcontinent. Rigid design and PLC based technology gives this machine a technological advantage over its competitors.

Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.

Also, PLC allows HYTECH machines to be operated remotely. Hence problem detection and eventual solution can be attained within minutes.

  • CLT100 with flatbed
  • CLT100 with slant bed and Hydraulic Tailstock

  • CLT100 with flatbed

Key features of this PLC based machine are as follows

  • Rapid of 1,200 mm/min
  • Position Accuracy: 5 micron / 0.005 mm
  • Repeatability: 10 micron / 0.010 mm
  • Feed Rate: 0 – 1,200 mm/min (Continuous Variable)
  • Based on FATEK PLC
  • Fanuc / Siemens emulated keyboards
  • Provision of C Axis
  • Automatically Opening Doors
  • 45 Degrees Slant Bed option available
  • Single Block Function
  • Dry Run Function
  • FMS Compatibility
  • Automatic Coolant
  • Automatic Lubrication
  • Hydraulic Power Chuck
  • Hydraulic Tailstock
  • High Speed Spindle

 

Industrial PLC

Imported Stepper Motor Drives from Singapore

This machine works on a Windows based software from CutViewer – United Kingdom. This software, which is used in more than 27 countries all over the world for industrial operations provides the necessary industrial exposure to students.


Separate Control Panel with PLC

  • Separate Control Panel
  • Industrial PLC
  • Servo Motors and Servo Drives from Mitsubishi / Siemens
  • Fanuc Emulated Keyboard
  • Easy Maintenance
  • Ample space provided for natural cooling. No Air Conditioning required
  • Easy Access
  • Zinc plated panel to give better EMF shielding and to reduce noise.

Separate controller behind machine providing easy access for maintenance



Hydraulic Chuck

  1. Indigenously developed Hydraulic Chuck
  2.  Spindle speed up to 4,000 RPM
  3. Air Mist Lubrication
  4. Available Chuck Sizes:110mm / 125mm / 150mm

Hydraulic Chuck with 200mm Diameter



Control Panel integrated with machine

Control Panel integrated with machine

  1. Industrial design
  2. Fanuc / Siemens Emulated Keyboard
  3. Operator Friendly Design
  4. Easy Maintenance

Provision for C Axis Arrangement

  1. 1. Provision for C Axis
  2. 2. Resolution of 0.01 Degrees

Separate Console with Industrial MOP



Key features of CutViewer Mill software are as follows

  • Cross Section Display
  • Built in Editor (for those last minute fixes)
  • Trace forward / backward
  • Dynamic rotation of viewpoint
  • Linear and Angular Measurement
  • STL Compare' function
  • Volumetric Measurement
  • Machining Time Calculation
  • Rapid Collision Detection
  • Canned Cycles
  • Dynamic Zoom / Pan / Rotation
  • Turbomode - Results in few seconds
  • Block cycle Time can be precisely measured

CutViewer Simulation Software




Machine Specifications

CLT 100
Machine Details:
Bed Type Flat / 45 Degrees Slant
Keyboard Type Fanuc Emulated / Standard
Chuck Size 100 mm (Dia)
Chuck Type Hydraulic / Manual
Maximum Turning Diameter 40 mm
Maximum Turning Length 250 mm
Center Height 100 mm
Swing over Cross Slide 60 mm
Swing Over Bed 200 mm
Distance between Centre 320 mm
CNC Controller Details
Controller CutViewer-United Kingdom
Control System PLC Based Control System
Operating Software CutViewer - United Kingdom
Accuracy
Positioning 0.010 mm
Repeatability +- 0.015 mm
Resolution 0.010 mm
Spindle
Spindle Motor AC Servo
Spindle Motor Capacity 2 HP
Spindle RPM 100 to 4000 RPM with VFD
Spindle Nose Taper A 2-3 / MT 3
Hole Through Spindle 20 mm
C Axis (Optional) C Axis with Brake
Axes
Axis Motor and Drive Stepper Motor with Stepper Drives imported from Singapore
X Axis Travel 100 mm
Z Axis Travel 300 mm
Ball Screw X / Z Ø25 x 5 - C3 Class
Programmable Feed Rate 0 to 1,200 mm/min
Rapid Travel 1,200 mm/min
Turret and Tooling
Turret Type Automatic
Number of Stations 4 / 8
Tool Cross Section 12 mm x 12 mm
Boring Bar Size 16 mm
Tailstock
Tailstock Base Stroke 170 mm
Tailstock Quill Stroke 30 mm
Tailstock Actuation Hydraulic/ Manual
Miscellaneous
Lubrication Automatic
Coolant Automatic
FMS Compatibility Provided
Real Time tool path simulation Provided
Dimension in mm 1480 x 800 x 1200 mm
Power Supply 230V, Single Phase
Download Download catalog of CLT 100.